Castles Payment Terminal Stands

Keep your Castles card machine secure, visible and within easy reach at the checkout. Each of our Castles payment terminal stands combines a steel backplate made to fit a specific Castles model with a swivel and tilt head. Customers can tap, insert or sign without picking up the device.

Choose a countertop pole in different heights or a wall mount. Fix it with screws or double-sided adhesive tape, and run the cables through the main tube for a clean, protected installation. We stock stands for the Saturn 1000, Vega 3000, S1F3 and S1P2, and can adapt the backplate to virtually any other terminal in the Castles range.

Why use a dedicated stand for your Castles payment terminal

A card machine left loose on the counter gets dropped, moved out of the customer's reach and eventually walks off. A dedicated stand fixes the terminal in one place, at the right angle, so every transaction starts without searching for the device.

  • Fewer drops and breakages: the terminal is held by a backplate made for its exact shape, not by a generic clamp.
  • Faster payments: the swivel head turns the screen towards the customer and back to staff in one movement.
  • A tidier counter: cables run inside the tube, so there are no loose wires to snag or unplug.
  • More privacy at the PIN entry: the tilt lets you set an angle that is comfortable for the customer and harder for others to see.

Castles models covered: Saturn 1000, Vega 3000, S1F3, S1P2 and more

Castles terminals come in very different shapes, from compact PIN pads to countertop units with built-in printers. That is why every stand in this category uses a bespoke backplate rather than a one-size-fits-all bracket.

Using a Castles S1F2, S1F4, S1U2 or another model supplied by your payment provider? Tell us the exact model and we will confirm the right backplate before you order. If your terminal is a compact PIN pad, also take a look at our Spire, Castles, PAX and Sunmi pinpad stands.

Countertop or wall: choosing the right Castles card machine holder

The best option depends on how much counter space you have and on who handles the terminal during the payment.

  • Countertop pole stand: the most common choice for shops, pharmacies and bars. Different pole heights let you raise the terminal above displays or keep it low for seated customers.
  • Wall mount: frees up the counter completely and suits drive-through windows, reception desks and narrow service points. See our full range of wall mounts for payment terminals and pinpads.
  • Integrated into a POS setup: if you also need to hold a monitor or a printer, a combined monitor and card reader stand or a monitor, card reader and printer stand puts everything on a single pole.

For terminals used on the move, such as by waiting staff on a terrace, a stand is not the answer. A pinpad and PDA holster keeps the device at hand without tying it to one spot.

Built for busy checkouts

A card reader stand is touched hundreds of times a day, so the materials matter as much as the fit.

  • Durable steel construction for the backplate and the pole.
  • Swivel and tilt head to adjust the viewing angle for customer and staff.
  • Internal cable routing through the main tube.
  • Installation with screws for a permanent fix, or with double-sided adhesive tape when you cannot drill the counter.

Where our Castles terminal stands are used

Castles card machines are supplied by many payment providers, so you will find them in almost every type of business that takes card payments. Our stands are commonly installed in hospitality venues, pharmacies, supermarkets and newsagents and corner stores. In all of them, a fixed and correctly angled terminal speeds up the queue.

To finish the checkout, pair your stand with a cash drawer for card and cash payments. You can also browse the complete range of ergonomic mounting solutions for the point of sale.

Need a stand for another terminal brand?

If your business runs more than one type of terminal, you can keep the same look across every till. We also make Ingenico terminal stands, Verifone payment terminal stands, PAX payment terminal stands and Miura pinpad stands. There are also universal stands for models not listed, and replacement backplates for existing poles. See every option in our payment terminal stands category, or contact us for a custom bracket.

Frequently Asked Questions about Castles Payment Terminal Stands

It is a mount that holds a Castles card machine in a fixed position on the counter or the wall. It uses a steel backplate made for the specific terminal model and a swivel and tilt head. The stand prevents drops and theft, and makes it easy to turn the terminal towards the customer.
We have stands for the Castles Saturn 1000 S1P, Vega 3000, S1F3 and S1P2. Because the backplate is made to measure, we can also supply stands for virtually any other Castles model, including the S1F2, S1F4 and S1U2. Send us the exact model name before ordering and we will confirm the fit.
Yes. The stands can be fixed with double-sided adhesive tape, which suits rented premises and counters you prefer not to drill. For heavy use or high-traffic checkouts, screw fixing gives the most secure installation.
Yes. The head rotates so you can turn the terminal from staff to customer, and it tilts to set a comfortable viewing angle. The right angle also makes PIN entry more private.
Yes. Wall-mounted versions are available, and they are useful when counter space is limited or at service windows. You can also see our full range of wall mounts for payment terminals and pinpads.
The backplate is the only part that is specific to each terminal model. Contact us before buying a whole new stand. In many setups, changing the backplate is enough to fit the new card machine.
The main tube of the stand is hollow so the power and data cables run inside it. This keeps the counter tidy and protects the cables from being pulled or damaged.