Spire & Sunmi Pin Pad Stands

Give your Spire or Sunmi pin pad a fixed, stable place at the checkout. Each of these steel pin pad stands has a model-specific holder and a handle that turns it through 330º and tilts it up to 140º. Customers can tap, insert or enter their PIN at a comfortable angle, and staff can turn the terminal back in a single movement.

Install your pin pad stand on the counter, desk or wall, with screws or with a double-sided adhesive washer if you prefer not to drill. Cables run inside the stand for a clean, protected setup. We have holders for the Spire SPp30 and SPc5 and for the Sunmi P2 SE, P2 Lite and P2 Pro.

Why fix your pin pad to a stand

A loose pin pad is handed back and forth, dropped and pulled by its cable dozens of times a day. A pin pad stand keeps the device in the same place for every payment, and that place is always within the customer's reach.

  • Less wear and fewer drops: the terminal sits in a holder shaped for its exact model.
  • Quicker transactions: no one has to search for the pinpad or pass it across the counter.
  • More discreet PIN entry: the tilt lets you set an angle that is comfortable for the customer and harder for others to see.
  • A tidier checkout: internal cabling keeps wires out of sight and out of the way.

Spire and Sunmi pin pad models we cover

Every pin pad stand in this category is made for a specific terminal, so the holder grips the device securely without covering the screen, keypad or card slot.

Don't see your pin pad model? Send us the exact name of your terminal. We also offer universal stands and custom brackets for devices not listed here.

How the pin pad holder swivels and tilts

Each holder has a handle for adjusting the pin pad without touching the device itself. It rotates through 330º, so the screen can face the customer during payment and the cashier the rest of the time. It also tilts up to 140º, which lets you avoid glare from overhead lighting and adapt the angle to a standing or seated customer.

Pin pad stand installation: counter, desk or wall

  • Countertop or desk: the most common setup for shops, pharmacies and reception desks.
  • Wall: frees up the counter completely at service windows or narrow points of sale. See also our wall mounts for payment terminals and pinpads.
  • Screws or adhesive: screw fixing gives the most secure installation. The double-sided adhesive washer avoids drilling, which is useful in rented premises or on delicate surfaces.

If the pin pad shares space with a screen or keyboard, a monitor, pinpad and keyboard stand or a monitor and card reader stand puts everything on one pole.

Pin pad stand or holster for your Sunmi terminal?

Sunmi P2 terminals are designed to be carried, so decide how your staff will use them. If payments happen at a fixed till, a stand keeps the terminal secure and always in the same place. If staff take payments at the table or on a terrace, a pinpad and PDA holster keeps the device at hand without tying it to the counter.

Looking for a stand for another terminal brand?

We have dedicated categories for other manufacturers, so you can keep the same look across every till: Castles payment terminal stands, PAX payment terminal stands, Ingenico terminal and pin pad stands, Verifone payment terminal stands and Miura pinpad stands. For an existing pole, check our payment terminal backplates. You can also browse all our payment terminal stands or contact us for advice.

Frequently Asked Questions about Pin Pad Stands

A pin pad stand is a mount that holds a card payment terminal in a fixed position on the counter, desk or wall. It keeps the pin pad stable and within the customer's reach, and lets you adjust the angle for payment. It also reduces drops and cable damage.
We have stands for the Spire SPp30 and SPc5, and for the Sunmi P2 SE, P2 Lite and P2 Pro. Each holder is made for its specific model. If you are not sure which terminal you have, check the label on the back of the device or send us a photo.
Yes. The stand gives your Sunmi card machine a fixed place at the checkout. If your staff also take payments away from the counter, a pinpad and PDA holster may suit that part of your service better.
The handle lets you rotate the terminal through 330º and tilt it up to 140º. You can turn the screen towards the customer for payment and set the angle that best suits your counter and lighting.
Yes. Besides screw fixing, the stands can be installed with a double-sided adhesive washer. This option works well in rented premises or on surfaces you do not want to drill.
Yes. The stands can be installed on the checkout, a desk or a wall. For more options, see our wall mounts for payment terminals and pinpads.
The stands have internal wiring, so the terminal's cables run inside the stand. This keeps the checkout tidy and protects the cables from being pulled or damaged.